top of page

Concrete Effect Plaster in Canada: Products, Coverage & Buying Guide

Nov 6
3 min read

Raw concrete walls and floors look modern, calm and architectural, but poured concrete is heavy, expensive and prone to cracking inside a home. Concrete effect plaster gives you the same look in a thin, hand-applied layer that goes over walls, floors and even existing tile. This guide compares the main concrete-look products, how much you need and how to buy them in Canada.



Minimalist interior with beige textured cement finish on floating stairs and walls

Planning a project in Metro Vancouver? Also read our guide to concrete effect plaster in Vancouver.

What is concrete effect plaster?

Concrete effect plaster is a cement- or lime-based decorative coating applied in thin layers with a trowel. Depending on the product and technique, it can look smooth and polished, cloudy and soft, or rough and textured like board-formed concrete. Because it is only millimetres thick, it adds almost no weight and no height.



Three ways to get the concrete look


1. Microcement: smooth, seamless concrete

Microcem-FB is a fibre-reinforced microcement for walls, floors, showers and countertops. It creates one continuous surface with no grout lines. Coverage: approx. 172 sq ft (16 m²) per 20 kg in 2 coats.

2. Cemento 3D: sculpted and textured concrete

Cemento 3D is a 3D decorative nanocement for sculpted, rock-like and textured surfaces. It is ideal for feature walls, fireplaces and commercial interiors. Coverage: approx. 172 sq ft (16 m²) per 20 kg in 2 coats.

3. Etna and Terra Veneziana: concrete with character


Minimalist room with a curved white sofa and terrazzo-look decorative floor

Mixed into Cemento 3D, Etna adds real volcanic ash from Mount Etna for a natural mineral texture, and Terra Veneziana Ambra adds coloured marble fragments for a terrazzo look. Each 4 kg pack covers approx. 172 sq ft (16 m²) in 2 coats with Cemento 3D 20 kg.


Concrete effect plaster vs. poured concrete vs. concrete-look paint


  • Poured concrete: authentic, but very heavy, slow, costly and likely to crack in a home.

  • Concrete-look paint: cheap and quick, but flat. It lacks the depth and texture of real mineral materials.

  • Concrete effect plaster: real mineral depth and texture, thin and light, and suitable for walls, floors and wet areas with the right system.


What else you need


  • Primer: Primer Beton (approx. 194 sq ft per 20 kg in 1 coat) for walls and floors, including over tile, or Primer NK (approx. 215 sq ft per 2.5 L) for smooth and non-absorbent surfaces.

  • Protection: Decor Finish top coat (approx. 172 sq ft per 2.5 L in 2 coats) or ProteKto EcoSilan water-repellent treatment (approx. 269 sq ft per 2.5 L in 2 coats).

  • Tools: stainless-steel or titanium trowels, sanding pads and mixing equipment.


How to calculate the quantity


Measure the total area in square feet, subtract large openings and add about 10% for edges and touch-ups. Example: a 10 ft × 8 ft feature wall is 80 sq ft, plus 10% is 88 sq ft. One 20 kg bag of Microcem-FB or Cemento 3D covers it in two coats.


Buying concrete effect plaster in Canada


3D Art Canada is the official Nikkolor Italia partner in Canada. We ship concrete effect plasters, primers, sealers and tools across the country, and we install in Metro Vancouver. New to these materials? Learn them hands-on at our workshops.


Frequently asked questions


Can concrete effect plaster be used on floors?

Yes. Microcement is designed for floors as well as walls and is sealed for durability.

Can it go over existing tile?

In most cases, yes, if the tile is solid and properly primed. This avoids demolition.

Is concrete effect plaster suitable for showers?

Microcement is, when it is installed with a complete wet-area system and sealer.

Want the concrete look? Shop concrete effect plasters or get a free quote for installation in Metro Vancouver.

 
 
 

Comments


  • Instagram
  • Facebook
  • Yelp!
bottom of page